New Manifold has arrived......

Tech Related Discussion

Postby Hammons Motorsports » Tue Apr 27, 2010 7:26 pm

8)
Bill and Cindi Hammons
Hammons Motorsports

95 Spizter, 421" SB2.2, 1.041 60', 4.76 @ 142.85
Hammons Motorsports
 
Posts: 127
Joined: Tue Nov 13, 2007 9:03 pm
Location: Back in the Mid West!!!

Postby Scott Smith » Tue May 04, 2010 8:20 pm

Any Progress?
Scott Smith
 
Posts: 713
Joined: Mon Nov 12, 2007 9:33 pm

Postby Chad Speier » Tue May 04, 2010 8:25 pm

Scott Smith wrote:Any Progress?


I just came from the welder. The dominator spacer isn't welded yet and it has 40 miles of rod already! :lol: We are building up the manifold so I can mill it and then add the dominator flange.

It's a ton of work.
Chad Speier
Image
Chad Speier
 
Posts: 1846
Joined: Mon Nov 12, 2007 6:03 pm
Location: Hays, Kansas

Postby jmarkaudio » Tue May 04, 2010 8:56 pm

Chad Speier wrote:
Scott Smith wrote:Any Progress?


I just came from the welder. The dominator spacer isn't welded yet and it has 40 miles of rod already! :lol: We are building up the manifold so I can mill it and then add the dominator flange.

It's a ton of work.



Mine took a LOT of weld, still waiting for time to go in and finish it. Soon....
Mark Whitener
Image
____________

Good work isn't cheap, and cheap work can't be good.
jmarkaudio
 
Posts: 605
Joined: Thu Nov 29, 2007 9:58 pm
Location: Florida

Postby 10.90streetcar » Wed May 05, 2010 5:11 pm

Chad Speier wrote:
It's a ton of work.

I wonder if it's really worth it?
Bill, have you changed anything else? Or will this be the only change for a true comparison?
FAST BY DESIGN

Image
SBC
1.040
2.991
4.673 @ 143.32
10.90streetcar
 
Posts: 80
Joined: Wed Jan 16, 2008 6:43 pm
Location: Las Vegas, NV

Postby Hammons Motorsports » Wed May 05, 2010 8:16 pm

This will be the only change made when it goes on.

There is a huge difference in the size of the plenum of this manifold.
Bill and Cindi Hammons
Hammons Motorsports

95 Spizter, 421" SB2.2, 1.041 60', 4.76 @ 142.85
Hammons Motorsports
 
Posts: 127
Joined: Tue Nov 13, 2007 9:03 pm
Location: Back in the Mid West!!!

Postby Chad Speier » Fri May 14, 2010 8:49 am

Stage 1.

Image

Stage 2.

Image
Chad Speier
Image
Chad Speier
 
Posts: 1846
Joined: Mon Nov 12, 2007 6:03 pm
Location: Hays, Kansas

Postby kingjack » Thu May 20, 2010 6:51 pm

Very interested in the performance results of this.
kingjack
 
Posts: 15
Joined: Tue Jan 12, 2010 4:21 pm

Postby jmarkaudio » Thu May 20, 2010 10:09 pm

Looks like progress. Wish I had time to pull mine back off, this is where I left off.


Image
Mark Whitener
Image
____________

Good work isn't cheap, and cheap work can't be good.
jmarkaudio
 
Posts: 605
Joined: Thu Nov 29, 2007 9:58 pm
Location: Florida

Postby Chad Speier » Fri May 21, 2010 5:09 pm

We go the extra mile here at Speier Racing Heads! 8) :D

Getting closer! I took this with my phone but will post up better pics tomorrow..

Image
Chad Speier
Image
Chad Speier
 
Posts: 1846
Joined: Mon Nov 12, 2007 6:03 pm
Location: Hays, Kansas

Postby Hammons Motorsports » Fri May 21, 2010 10:38 pm

Hey Chad!!

Looking fantastic....

You need to get your logo set up so that you can get it on the heads and manifolds that you do!!!
Bill and Cindi Hammons
Hammons Motorsports

95 Spizter, 421" SB2.2, 1.041 60', 4.76 @ 142.85
Hammons Motorsports
 
Posts: 127
Joined: Tue Nov 13, 2007 9:03 pm
Location: Back in the Mid West!!!

Postby Chad Speier » Fri May 28, 2010 3:42 pm

updates:

Image

Image

Image

Image
Chad Speier
Image
Chad Speier
 
Posts: 1846
Joined: Mon Nov 12, 2007 6:03 pm
Location: Hays, Kansas

Postby Dr J's Performance » Fri May 28, 2010 8:16 pm

man that's looking nice !!!!!
Bryce Mulvey
Dr J's Performance
"The Home of Innovative Air Flow technology"
(714) 943-3404
www.j-performance.com
Dr J's Performance
 
Posts: 122
Joined: Thu Aug 20, 2009 11:24 pm

Postby Hammons Motorsports » Fri May 28, 2010 8:35 pm

WOW!!

Can't wait to get it back and on then car...... :D
Bill and Cindi Hammons
Hammons Motorsports

95 Spizter, 421" SB2.2, 1.041 60', 4.76 @ 142.85
Hammons Motorsports
 
Posts: 127
Joined: Tue Nov 13, 2007 9:03 pm
Location: Back in the Mid West!!!

Postby mikeyfrombc » Fri May 28, 2010 11:05 pm

nice work Chad , where did you get that fixture you mount the manifold too ?? got anymore pics of it ??
mikeyfrombc
 
Posts: 57
Joined: Sun Apr 12, 2009 10:24 pm
Location: WHONNOCK BC CANADA

PreviousNext

Return to General Talk

Who is online

Users browsing this forum: No registered users and 1 guest

cron