Pro-Filer Budget CNC SBC

Cylinder Head and Manifold Discussion

Pro-Filer Budget CNC SBC

Postby Chad Speier » Fri Dec 23, 2016 5:23 pm

To help stay competitive in the SBC wars, For 2017 SRH will be offering the v2.45BECNC/23º. The CNC port will offer the same port program as the original 220cc "AirWolf." The CNC machining will be a rougher finish for machine time savings which means a powerful cylinder head for the budget minded.

SRH 2.08/1.600 stainless valves. Roller .680 roller, .600 FT or HYD spring. USA moly retainers, USA machined locks, USA locators, USA 190,000 PSI studs, USA guide plates. Metal clad seals. Heads are valve jobbed, decked, and bagged for assembly. 220cc port, 65-72cc chambers
Fully CNC intake ports and chambers. As-cast exhaust. Program fits into a as-cast 195cc Pro-Filer casting.

$1995.00 complete
add $70 for KMotion-K850 HYD .650 lift springs
add $90 for KMotion-K1150 roller .740 lift springs
add $100 for SRH385C roller .740 lift springs
add $125 for KMotion-K1650 roller .740 lift springs
add $150 for Manley Titanium Retainers
add $100 for SRH Titanium Retainers
Chad Speier
Image
Chad Speier
 
Posts: 1846
Joined: Mon Nov 12, 2007 6:03 pm
Location: Hays, Kansas

Re: Pro-Filer Budget CNC SBC

Postby RacerX » Fri Dec 23, 2016 7:46 pm

That looks like a pretty good deal! It's the Airwolf program??
RacerX
 
Posts: 131
Joined: Thu Nov 15, 2007 12:07 pm

Re: Pro-Filer Budget CNC SBC

Postby ClassicComp » Sat Jan 07, 2017 3:09 pm

since I do this for a living I have to ask. Whats the time cycle for 1 head?
ClassicComp
 
Posts: 19
Joined: Fri Dec 28, 2007 8:36 pm

Re: Pro-Filer Budget CNC SBC

Postby Chad Speier » Sat Jan 07, 2017 6:20 pm

ClassicComp wrote:since I do this for a living I have to ask. Whats the time cycle for 1 head?


Not sure what your asking??
Chad Speier
Image
Chad Speier
 
Posts: 1846
Joined: Mon Nov 12, 2007 6:03 pm
Location: Hays, Kansas

Re: Pro-Filer Budget CNC SBC

Postby curtis reed » Sat Jan 07, 2017 8:24 pm

I believe he is asking about the cycle time on the machining center to cut one head. I. E. program run time.

Curtis
curtis reed
 
Posts: 41
Joined: Thu Nov 15, 2007 6:41 am
Location: MOUNDS,OK.

Re: Pro-Filer Budget CNC SBC

Postby ClassicComp » Thu Jan 12, 2017 3:48 pm

Cycle time =. How long to machine the head
ClassicComp
 
Posts: 19
Joined: Fri Dec 28, 2007 8:36 pm

Re: Pro-Filer Budget CNC SBC

Postby Chad Speier » Thu Jan 12, 2017 4:05 pm

ClassicComp wrote:Cycle time =. How long to machine the head


I don't really know cycle time, just know what I pay! :)
Chad Speier
Image
Chad Speier
 
Posts: 1846
Joined: Mon Nov 12, 2007 6:03 pm
Location: Hays, Kansas


Return to Induction Talk

Who is online

Users browsing this forum: No registered users and 1 guest

cron