[trmnatr]

We just took some pics of the Dart 227 Pro 1 CNC'd Heads for testing in the 327 .060" aluminum rod engine. I still have to upload the pics and dont really have the time right now, but will upload them within an hour

Just some advertised specs on them,
- 227cc CNC'd Intake Runners
- 85cc exhaust ports
- CNC Chambers
- 2.08"/1.6" valves
- Dual Springs
- Titanium Retainers

Advertised Airflow from Stan Weiss's cylinder head data base (these will be flowed however and the numbers posted)

.200" 158 - 117
.300" 209 - 149
.400" 257 - 182
.500" 293 - 211
.600" 302 - 220
.700" 309 - 226
.800" 314 - 232
_________________
cranecams.com
j-performance.com
kingbearings.com
santhuffshocks.com
richmondgear.com
ohiocrank.com
prosystemsracing.com
coasthigh.com
probeindustries.com
ferrea.com
hardblok.com/info.html
tricktrucks.com

[trmnatr]

Dart 227cc Pro 1 CNC'd Intake Runners


Dart 227cc Pro 1 CNC'd Chambers


Dart 227cc Pro 1 CNC'd Exhaust Runners


Dart 227cc Pro 1 CNC'd Heads, Retainers/Springs

_________________
cranecams.com
j-performance.com
kingbearings.com
santhuffshocks.com
richmondgear.com
ohiocrank.com
prosystemsracing.com
coasthigh.com
probeindustries.com
ferrea.com
hardblok.com/info.html
tricktrucks.com

[Hitchcock]

I know a guy who has a set on a 355 and runs nines on gas. The car weighs less than 2600 race ready. He said it only 60' at 1.50's.
_________________
I'll let you know when it's fast enough
73 Vette tunnel rammed 496

[Scott Smith]

Not knocking these heads but once you have seen one you have seen them all. They all have a push rod pinch from hell.

[68corvette]

What is the pinch? looks like ~2sq.in or so?

[SStrokerAce]

Yeah the Dart casting doesn't have much room there... think we get about 2.4 as they sit

[trmnatr]

[lun40119]

[SStrokerAce]

Actually looking back it's smaller than that.... like 2.25" I think

[trmnatr]